CTRMA ITS equipment that is distributed on and along the toll roads and lanes that monitors and controls traffic and monitors and manages the roadway. Includes traffic detectors, environmental sensors, dynamic message signs, CCTV cameras, and video image processing systems.
| Functional Object | Description | User Defined |
|---|
| Field System Executive | 'Field System Executive' includes the operating system kernel and executive functions that manage the overall device software configuration and operation and support configuration management, computer resource management, and govern software installation and upgrade. | False |
|---|
| Field System Monitoring and Diagnostics | 'Field System Monitoring and Diagnostics' includes background self–tests, diagnostics, watchdog timers, and other hardware and software that monitors the operating condition of field equipment. The status of the equipment and diagnostic information is provided to local maintenance personnel and the operating center. | False |
|---|
| Roadway Advanced Rail Crossing | 'Roadway Advanced Rail Crossing' manages highway traffic at highway–rail intersections (HRIs) where operational requirements demand advanced features (e.g., where rail operational speeds are greater than 80 miles per hour). The active warning systems supported by this application include positive barrier systems which preclude entrance into the intersection when the barriers are activated. This application is activated on notification by wayside interface equipment which detects, or communicates with the approaching train. In this application, additional information about the arriving train is also provided by the wayside interface equipment so that the train's direction of travel, its estimated time of arrival, and the estimated duration of closure may be derived. This enhanced information may be conveyed to the driver prior to, or in context with, warning system activation. This application also includes detection capabilities which enable it to detect an entrapped or otherwise immobilized vehicle on the grade crossing and provide an immediate notification to the wayside interface equipment and traffic management. | False |
|---|
| Roadway Basic Surveillance | 'Roadway Basic Surveillance' monitors traffic conditions using fixed equipment such as loop detectors and CCTV cameras. | False |
|---|
| Roadway Data Collection | 'Roadway Data Collection' collects traffic, road, and environmental conditions information for use in transportation planning, research, and other off–line applications where data quality and completeness take precedence over real–time performance. It includes the sensors, supporting roadside infrastructure, and communications equipment that collects and transfers information to a center for archival. | False |
|---|
| Roadway Emissions Monitoring | 'Roadway Emissions Monitoring' monitors emissions and general air quality and communicates the collected information back to the Emissions Management Center where it can be monitored, analyzed, and used. This functional object supports point monitoring of individual vehicle emissions as well as general monitoring of standard air quality measures. | False |
|---|
| Roadway Environmental Monitoring | 'Roadway Environmental Monitoring' measures environmental conditions and communicates the collected information back to a center where it can be monitored and analyzed or to other field devices to support communications to vehicles. A broad array of weather and road surface information may be collected. Weather conditions that may be measured include temperature, wind, humidity, precipitation, and visibility. Surface and sub–surface sensors can measure road surface temperature, moisture, icing, salinity, and other metrics. | False |
|---|
| Roadway Field Device Support | 'Roadway Field Device Support' monitors the operational status of field devices and detects and reports fault conditions. Consolidated operational status (device status, configuration, and fault information) are reported for resolution and repair. A local interface is provided to field personnel for local monitoring and diagnostics, supporting field maintenance, upgrade, repair, and replacement of field devices. | False |
|---|
| Roadway HOV Control | 'Roadway HOV Control' monitors and controls high occupancy vehicle (HOV) and high occupancy toll (HOT) lanes. It includes traffic sensors that monitor HOV lane usage and display equipment such as lane control signals that provide lane status to drivers. | False |
|---|
| Roadway Incident Detection | 'Roadway Incident Detection' provides incident detection using traffic detectors and surveillance equipment. It monitors for unusual traffic conditions that may indicate an incident or processes surveillance images, watching for potential incidents. It provides potential incident information as well as traffic flow and images to the center for processing and presentation to traffic operations personnel. | False |
|---|
| Roadway Lighting System Control | 'Roadway Lighting System Control' includes field equipment that controls lighting systems for transportation facilities and infrastructure. It includes the sensors, lighting controllers, and supporting field equipment that monitors and controls lighting systems. The equipment supports control based on sensed local conditions, stored timing plans, and remote commands from a center. It monitors lighting system status and reports status to the controlling center. | False |
|---|
| Roadway Passive Monitoring | 'Roadway Passive Monitoring' monitors passing vehicles for a signature that can be used to recognize the same vehicle at different points in the network and measure travel times. Depending on the implementation and the penetration rate of the technology that is monitored, other point traffic measures may also be inferred by monitoring the number of vehicles within range over time. Today this approach is implemented most commonly using a Bluetooth receiver that passively monitors Bluetooth devices on–board passing vehicles and license plate readers that record the vehicle license plate number, but any widely deployed vehicle communications technology or feature that can be passively monitored to uniquely identify a vehicle could be used. | False |
|---|
| Roadway Restriction Monitoring and Warning | 'Roadway Restriction Monitoring and Warning' measures the size and weight of passing vehicles and displays warnings to vehicles if the size exceeds the current infrastructure restrictions. The measured vehicle dimensions are also made available to other applications. | False |
|---|
| Roadway Speed Monitoring and Warning | 'Roadway Speed Monitoring and Warning' includes the field elements that monitor vehicle speeds. If the speed is determined to be excessive, an advisory or warning is displayed. Current environmental conditions and other factors that may reduce safe operating speeds may also be taken into account. The operational status (state of the device, configuration, and fault data) is provided to the center. This application can also provide an enforcement function, reporting speed violations to an enforcement agency. | False |
|---|
| Roadway Traffic Information Dissemination | 'Roadway Traffic Information Dissemination' includes field elements that provide information to drivers, including dynamic message signs and highway advisory radios. | False |
|---|
| Roadway Work Zone Safety | 'Roadway Work Zone Safety' includes field elements that detect vehicle intrusions in work zones and warns crew workers and drivers of imminent encroachment. Crew movements are also monitored so that the crew can be warned of movement beyond the designated safe zone. | False |
|---|
| Roadway Work Zone Traffic Control | 'Roadway Work Zone Traffic Control' controls traffic in areas of the roadway where maintenance and construction activities are underway, monitoring and controlling traffic using field equipment such as CCTV cameras, dynamic messages signs, and gates/barriers. Work zone speeds and delays are provided to the motorist prior to the work zones. | False |
|---|
| Roadway Wrong Way Vehicle Detection | 'Roadway Wrong Way Vehicle Detection' provides wrong way vehicle detection using traffic detectors and surveillance equipment. It provides potential wrong way vehicle notifications as well as supporting detector data and images to the center for processing and presentation to traffic operations personnel. | False |
|---|
| Document Number | Title | Description |
|---|
| ITE ATC 5201 | Advanced Transportation Controller | This standard defines the functionality and performance requirements for a modern ITS controller known as an ATC. It is similar to the NEMA TS–2 standard in that it defines basic capabilities but leaves hardware choices up to the manufacturer. |
|---|
| ITE ATC 5202 | Model 2070 Controller Standard | This standard specifies the hardware for a modern, open–architecture controller for ITS applications that can run Linux and is capable of executing advanced signal controller logic, among other things. |
|---|
| ITE ATC 5301 | Intelligent Transportation System Standard Specification for Roadside Cabinets | This standard specifies the characteristics of a modern controller cabinet for the ITS industry. |
|---|
| ITE ATC 5401 | Application Programming Interface Standard for the Advanced Transportation Controller | This standard defines the application programmers' interface (API) that should be supported by an ATC, which is an open–architecture controller that can host multiple ITS applications. |
|---|
| NEMA TS 5 | Portable Traffic Signal Systems (PTSS) Standard | This standard specifies traffic signaling equipment used to enable and expedite the safe movement of vehicle traffic and the performance of work zone activities. |
|---|
| NEMA TS 8 | Cyber and Physical Security for Intelligent Transportation Systems | This specification describes how agencies and other transportation infrastructure owner/operators should implement cyber– and physical–security for ITS. |
|---|
| NEMA TS2 | Traffic Controller Assemblies with NTCIP Requirements | This specification covers traffic signaling equipment used to facilitate and expedite the safe movement of pedestrians and vehicular traffic. |
|---|
| NEMA TS4 | Hardware Standards for Dynamic Message Signs (DMS) With NTCIP Requirements | This standard provides hardware specifications for safe, dependable, functional, and easily maintained Dynamic Message Sign (DMS) equipment. |
|---|